Write the impact section of each deviation and steer the trace
- Each ring traced with the record behind it
- An inspector's questions before signing
- Holds placed while the evidence comes in
A deviation impact assessment that follows a suspected cause through the same equipment, shared lots, sister machines and shipped batches, with the record behind every mark.
See one deviation traced ring by ring ↓Once an investigation records a suspected cause, the GMP rule is plain: the investigation reaches other batches and products the failure may be associated with, shipped or not. In most plants the impact section is still written by hand from the historian, the maintenance system, change control, lot usage and the shipment list, and it covers the batch that failed.
So a sister granulator with the same software change goes unread, a raw material lot shared with another client's product stays in use, and a released batch waits in the warehouse with its shipment booked. The client learns of the deviation from its own release review.
Built forQA deviation specialistsHeads of qualityProduction supervisorsRegulatory CMC specialists
Impact checks end at the batch that failed, while sister machines, shared lots and shipped batches wait for someone to think of them.
Read one system at a time
Built-in controls
Each client hears from the plant first, with the record behind every batch, and keeps trusting the plant that told it.
The QA deviation specialist, the QA head, QC and regulatory CMC use them to answer one question: what else does this cause touch? They follow one granulation deviation.
demoSample data throughout: the contract manufacturer, its clients and people, the batches and the numbers.
The specialist builds it, the QA head decides it, production plans around it, regulatory CMC answers for the filing.
Write the impact section of each deviation and steer the trace
Classify each deviation, release holds and sign each client notice
Raise the deviation and plan each shift around the holds
Decide whether an event departs from the client's registered process
Each agent names who gets its result next: another agent, or the person who decides.
Reads the deviation and the approved root cause, plans the six rings and applies the rules the QA head approved.
Reads maintenance, calibration and configuration records, then each batch's historian trace against its validated range.
Finds each batch that used a material lot, in any client's product, and the stock left.
Reads where each batch is, from in process to shipped, and places holds under the setting the QA head signed.
Reads the validation report, the stability protocol and the client's registered process for each batch in scope.
Attacks the draft as an inspector would, including the agents' own plan and the approved root cause.
Drafts each client notice against its quality agreement clause, and the impact report for the investigation.
Before a trace, the queue shows what waits in each plant; after it, QC, regulatory and the client answer in fields.
demoSample data, from the working solution.
A signature carries its meaning, and nobody checks their own work.
Deviation impact assessment is the part of a deviation record that says what else the event touches: other batches and products, shipped batches, validation and stability batches, and the client's registered process. Here agents trace each one and cite the record behind each mark, and the QA head classifies.
Under the GMP rule on production record review, an unexplained discrepancy is investigated whether or not the batch was distributed. The investigation extends to other batches and products associated with the failure; here that means the same equipment since its last change, shared lots, sister equipment and shipped batches.
Yes, and that is the only step they take on their own. Under a setting the QA head signed, a batch that shares the suspected cause and has not left goes on hold at once, and the QA head reads each reason afterwards.
Triage sets a provisional class on the first batch. After the trace, the agents set each criterion of the site's classification SOP beside its evidence and propose a final class. The specialist proposes it; the QA head opens the cited records, then confirms the class or returns it with a reason code.
The notice drafter writes each notice against that client's quality agreement clause and due date, and the QA head signs it before it goes out through the client portal. The client answers structured requests in fixed fields.
No. It sets the client's registered process beside the event, such as whether a parameter is registered at all, and asks the client in fixed fields. Regulatory CMC and the client decide the filing impact.
After triage sets a provisional class and the investigation records a suspected cause, and before the final class and the CAPA. Here agents trace each ring out from that cause, and the QA head confirms the class.
"Human error" is earned, not assumed, and the fix lands on the design of every line.
1-min demoRoot Cause Analysis MethodsEvery candidate cause proved or ruled out by a record, so the root cause has already answered the inspector.
1-min demoCAPA PlanningPlans that remove the cause from the system, with the test of success written before the work starts.
1-min demoBring one closed deviation with its batch records, lot usage and shipments, and we will trace its impact ring by ring against them.