WorkflowQuality Operations & CAPA

Raw Material Release & Identity Testing

Raw material release drawn as the delivery itself: each drum's identity result lands on its square, the certificate is read against your specification, and one failed drum holds the whole lot.

Follow one delivery of an active, drum by drum ↓
Watch with transcript →
The problem

The handheld passed twenty-three drums, and the certificate said Complies

Identity is scanned on each container at the dock, yet the work around the scan is still clerical: results retyped into the LIMS, certificates compared by eye, and the reduced-testing count kept in one person's spreadsheet.

The quiet errors pass that way. A certificate line that says Complies where the specification asks for a value gets ticked, a drum that reads low is noticed after the batch is planned around it, and the client hears days later.

Built forQC supervisorsQC samplersSupplier quality specialistsHeads of QA

The Problem Today

Each container is scanned, but the certificate check, the reduced-testing count and the supplier's questions are still worked by hand.

Every
container identity-tested unless sampling is validated, Annex 8 published

Compared by eye today

  • Certificate
  • Scans
  • Counters
  • Emails
  • A wrong drum found at weigh-outThe mix-up surfaces once the batch is already being made
  • Missing values ticked as passedA certificate word stands in for the number the specification asks

The Solution

  1. Each drum read where it standsHandheld results land on the pallet picture beside the certificate
  2. A low match holds the lotThe safer step is taken at once and drafts the deviation
  3. An inspector agent reads the caseIt found the certificate line the agents' own draft had passed
  4. QC signs the hold and the testThe supervisor confirms the hold and orders the laboratory test

Built-in controls

  • Nobody releases a lot they prepared
  • Supplier free text waits for a named person
  • Past rulings apply only after QA signs them

What You Get

Each lot reaches the dispensary with its container results, its certificate reading and its supplier's standing on the record.

  • Mix-ups stopped at the dockA drum that does not match holds its lot before weigh-out
  • Clients hear with the evidenceThe notice goes out within the quality agreement's clause
  • A new supervisor asks expert questionsThe inspector's challenge comes with each delivery
Features

Raw material release features, from the dock to the dispensary

A delivery of a client's active arrives as twenty-four fiber drums on six pallets. The QC sampler scans each one, the agents read the certificate and the supplier's record, and the QC supervisor decides.

demoThe CDMO, its client and supplier, the people, lots and readings are sample data.

  1. 01Delivery grid

    Identity testing of raw materials on each container, drawn as the delivery

    • Pallets and drums as they stand. The sampler sees which drum is being scanned, and each handheld result lands on its square instead of being retyped into the LIMS.
    • Seals and labels from the receiving record. The receiving clerk's checks of each seal, label and dent sit on the same picture as the identity reads.
    • Nothing concluded before the read. Certificate lines show not read until the agents reach them, so no verdict appears ahead of its evidence.
  2. 02Low match

    One drum below the validated threshold holds all twenty-four

    • The hold placed at once. Release and dispensing are blocked for the whole lot the moment one drum reads low, because a mixed delivery cannot be ruled out from one scan.
    • The low match read against validation. The identity reader notes that 0.71 sits inside the range validation saw for the active's other polymorph, and calls it a lead for the lab to settle.
  3. 03Drum record

    Raw material identification by handheld Raman, drum by drum

    • Spectrum against the reference. The supervisor decides from the drum's own spectrum, seal and label rather than from a colored square.
    • Who scanned it, on which instrument. Each result carries the method, the instrument and its daily check, so an auditor can follow it back without asking the lab.
  4. 04Certificate check

    Certificate of analysis read line by line against your own specification

    • Each line beside its limit. Assay, impurities, water, solvents, particle size and polymorphic form are matched to the specification passage they answer.
    • The signer and the site checked. The certificate's site and designated signer are compared with the approved supplier list before any line counts.
  5. 05Inspector

    An inspector agent challenges the release case before anyone signs

    • A word accepted where a value belongs. The inspector caught the draft passing a certificate line with no number; the line became a gap and a question to the supplier.
    • Why trust the certificate for the rest. A failed container suspends certificate acceptance, so the lot goes to full testing and the supervisor picks the sampling with a reason code.
    • Each answer cited. The last full test, the approved site and the method's specificity each open the record behind the answer.
  6. 06Hold and lab

    Raw material release testing ordered: FTIR, XRPD and assay on the failed drum

    • Confirmed with a stated meaning. The QC supervisor opens the scans, then signs the hold with a user ID, password and the meaning lot held, deviation opened.
    • XRPD in the first order. X-ray diffraction is ordered with FTIR and assay, because it settles which polymorph of the active the drum holds.
    • What the hold stops, in batches. The supervisor sees which client batches wait on the lot and when the first dispensing needs it.
  7. 07Supplier request

    Supplier questions sent in fixed fields, each with the reason it is asked

    • One field per question asked. The supplier answers what drum 17 was filled from, its seal and weight, and the missing value, each in its own field.
    • Out the door only when QA sends it. No agent writes to a supplier; the request leaves only when the QA specialist sends it.
  8. 08Answer

    The supplier's answer changes the lab plan only through its fields

    • Reworked material found in one drum. The answer adds the sub-batch record and an XRPD of the supplier's retained sample to the order, which clears the supervisor's signature until it is signed again.
    • A clause in the supply agreement. Rework supplied without notice is matched to the supplier quality agreement and a corrective action request is proposed.
    • The open line closed from the printout. The particle size line closes at the value on the supplier's attached method printout.
  9. 09Release

    A maker-checker raw material release and the lot passport for dispensing

    • Prepared by one, released by another. The sampler prepares, and the supervisor releases only after opening the scans and the certificate, never a record they prepared.
    • Each container result into dispensing. The lot passport carries each bag's identity result, so the dispensary weighs only released, identified containers.
    • A held lot blocked where it is used. The held active shows blocked on the release screen and on the dispensary's passport, and lifting it is the QA head's call, made in the deviation.

The QC supervisor decides the lot; QA decides what the supplier has earned

Sampling, release and holds sit in QC; supplier standing and client notices sit in QA, with a second person on each.

QC supervisors

Confirm holds, order confirmatory tests and release raw material lots

  • Each drum's spectrum, seal and label in one place
  • Inspector questions answered before signing
  • Holds and lab orders drafted for review
QC samplers

Scan each container and prepare release records

  • Results placed on the drum without retyping
  • Composite drums named by the sampling plan
  • Send-backs with a reason code
Supplier quality specialists

Send supplier requests, propose status changes and prepare client notices

  • A reduced-testing counter kept per material
  • Answers that arrive as fields and attachments
  • Past rulings on each supplier in view
Heads of QA

Approve supplier status changes, settings and notices sent to clients

  • Evidence opened before any approval
  • No status change signed by its proposer
  • Signed results never rewritten by a setting

Nobody approves what they proposed, prepared or drafted

QC supervisor
Sees
The drum's spectrum and the hold record, each open for a few seconds before signing
Signs
The hold, the laboratory order, and again when the supplier's answer changes it
Supplier quality specialist
Sees
The suspension rule, the lot counter and the failed container
Signs
The proposal to suspend certificate acceptance, and the prepared client notice
QA head
Sees
The proposal's evidence and the notice text, each opened first
Signs
The suspension of certificate acceptance and the notice sent to the client
QC sampler
Sees
The scans and certificate of a clean lot
Signs
The prepared release record, which the supervisor then releases or sends back
VP Quality
Sees
A rule drawn from past rulings that would apply at all four plants
Signs
Its approval, since one plant's QA head does not set rules for the others
More screens

The supplier loses certificate acceptance the same morning its drum fails

What changes around the lot after the hold: the supplier's standing, its answer, the client's notice and the queue across plants.

Reduced testing suspendedLot 5 of 6 since the last full test; the specialist proposed suspending certificate acceptance and QA's head signed it, so each lot is tested in full.
The supplier answers in its own portalThe maker's QA manager fills each asked field and attaches the printout, the reissued certificate and the sub-batch record; it sees nothing else of the plant.
The client told within its clauseSupplier quality prepared the notice and QA's head signed it; the lab order now carries the sub-batch review, signed again.
Open receipts at four plants58 open receipts with plan, stage, clock and owner; the held lot's clock is paused, and samplers are assigned in bulk.
Each sign-off from the confirmed hold to the releaseEach signature in order, from the confirmed hold to the release, with who signed, the role, the reason and what the signature meant.
A threshold that is not a settingThe identity threshold comes from method validation and changes only through change control; the full-test interval and composite plan are proposed and signed.

demoSample data, from the working solution.

What the delivery hid behind twenty-three good drums

A drum filled from reworked material

Drum 17 read 0.71, inside what validation saw for the other polymorph; the supplier's answer named a reworked sub-batch.

A particle size line with no number

The specification asks for d90 of at most 45 µm; the certificate said Complies, which the first draft had passed.

Rework supplied without notice

The supplier quality agreement asks for notice before reprocessed material ships, so a corrective action request was raised.

A certificate no longer earned

One failed container ended reduced testing for this supplier's active until the deviation closes.

demoSample data, from the working solution.

The hold drafter acts first; the inspector agent reads everything twice

Seven agents read receiving, scan, certificate and supplier records, and take only the safer step on their own.

Receipt checker

Reads the receiving record, delivery note, order, labels, seal numbers and the approved supplier list.

  • Marks no container checked that the clerk did not record
Identity reader

Reads each handheld result as it uploads and compares it with the validated threshold and the validation report.

  • Passes no container below the threshold
  • Names no cause
Certificate reader

Reads the certificate line by line against the plant's specification, with the passage each line answers.

  • Edits no certificate
Supplier status agent

Keeps the reduced-testing counter, the lot history and past rulings, and proposes status changes and rules.

  • Changes no supplier status
  • Puts a learned rule to work only once approved
Hold drafter

Places the hold on a failed container at once and drafts the deviation, the laboratory order and the client notice.

  • Releases nothing and lifts no hold
  • Classifies no deviation
Inspector

Reads the release case as an inspector would before anyone signs, the agents' own drafts included.

  • Marks no point of its own as settled
  • Softens no point
Request writer

Builds the structured request to the supplier and reads the answer from its fields and attachments.

  • Acts on no free text
  • Sends nothing without the specialist

Questions QC teams ask about raw material release

What is raw material release?

Raw material release is the quality control unit's decision that a lot of an active or excipient may be used, once its containers are identified and its tests or certificate checked. The QC supervisor releases it.

Does each container need an identity test?

EU GMP Annex 8 asks for an identity test on a sample from each container unless a validated procedure ensures no container is mislabeled, and FDA asks for at least one identity test of each component. The handheld reads each container here.

How does a supplier earn and keep certificate acceptance here?

The supplier status agent keeps the count of lots since the last full test and the date it falls due. Supplier quality proposes each status change, and the plant's QA head signs it; nobody signs a proposal of their own.

Can a handheld spectrometer tell polymorphs apart?

This method flags a form that does not match but does not name it. A low match can sit inside the range validation saw for another polymorph, so the agents treat it as a lead and the laboratory order includes XRPD to settle it.

Does an agent ever release a lot or lift a hold?

No. Agents may place a hold, the safer step, and draft records. Release is signed by the QC supervisor, while a hold is lifted only by QA, in the deviation.

Send us the delivery
you would least like to sample.

Share one receipt's scans, certificate and specification, and we will read it container by container, with the inspector's questions answered.