WorkflowQuality Operations & CAPA

Contamination Control Strategy (Annex 1)

A contamination control strategy drawn as one bowtie per hazard, with each control re-checked against its records the day a new record touches it.

See one glove hazard re-checked, screen by screen ↓
Watch with transcript →
The problem

The strategy promised a glove test before each campaign, and none had been run

A sterile plant's strategy is written by a team led by QA, approved, and read again at the annual review. The proof behind each control lives somewhere else: glove test logs on the filling line, plates in the environmental monitoring system, the simulation protocol in validation, deviations and change controls in the QMS, training in the learning system. Between reviews, nobody reads the strategy against them.

So the text and the floor drift apart. Operators start making a routine refill through a second glove port, one the last simulation used only for other work. A sporicide schedule changes without anyone checking it against the strategy, and a sentence keeps promising a test that is still only planned. An inspector reading the batch records can find it first, and so can the client's auditor.

Built forSterility assurance leadsQA headsEnvironmental monitoring specialistsValidation engineers

The Problem Today

The strategy gets one careful reading a year, while the glove logs, plates and batch records behind it change daily.

16
elements EU GMP Annex 1 2.5 lists for a strategy to weigh published
3
repeat runs in a row, at least, after a failed APS: Annex 1 9.46 published

Read side by side once a year

  • Glove logs
  • Plates
  • Batches
  • Media fill
  • A refill port no media fill coveredBatch records show a routine refill the last simulation never ran
  • Text ahead of the floorA section promises a glove test the plant has not started

The Solution

  1. One bowtie per hazardThreats and preventive controls on one side, detection and response on the other
  2. Tied to the records that prove itEach control linked to its passages and read again when a new record lands
  3. Routine set against the media fillInterventions counted by type and glove port, beside the protocol line
  4. QA approves after opening each changeThe author signs the revision; the QA head opens the changes, then approves

Built-in controls

  • Each revised sentence cites its record
  • Its author cannot approve the revision
  • Client auditors read approved text only

What You Get

An inspector or a client's auditor reads a strategy that matches the plant on the day they open it.

  • Weak barriers seen between reviewsThe unsimulated refill port showed on the first re-check that compared by port
  • A new lead inherits the rulingsHow the last lead compared interventions stays as a rule the agents follow
  • Evidence gathered once, used againThe same links serve the yearly review and the client's next audit
Features

Contamination control strategy features, from bowtie to signed revision

Five new records touch an isolator's glove hazard. The sterility assurance lead re-checks it, finds a refill port no simulation covered, decides, and sends the revised strategy to the QA head.

demoThis isolator and its plant, people and numbers are sample data.

  1. 01Bowtie

    Contamination control strategy drawn as one bowtie per hazard

    • Threats, barriers and consequences on one diagram. The lead sees where each control sits against the hazard, so a weak preventive barrier reads differently from a weak detection.
    • Each control lit by its newest record. Clean, open, gap or stale comes from the record the agents read, with the passage one click away.
    • A re-check whenever a record touches it. A deviation, an extension or a batch record queues the hazard for its owner, and a Grade A record is due within a business day.
  2. 02Glove test gap

    Glove integrity testing read from the test log, against Annex 1 4.21

    • The section's promise beside the test log. Tests after each campaign passed, and the log holds none before a campaign, so the control reads gap instead of clean.
    • Interim control shown with its start. The interim test of every glove before each campaign and the date the permanent procedure takes over sit on the control itself.
  3. 03Interventions

    Media fill interventions counted by type and glove port against the protocol

    • Batch record entries counted by port. Each intervention in the window's batch records is counted by type and access point, so a port change shows even when the type was simulated.
    • The simulation protocol shown as written. The protocol's list of interventions sits beside the count, with the line that names the port the media fill used.
    • Frequency left to the protocol owner. Per-batch and per-run counts appear together, and whether the run matches routine frequency stays the validation engineer's call.
  4. 04Challenger

    An inspector's questions put to the strategy and to the agents' own draft

    • A glove sentence the draft copied, withdrawn. The challenger found the revision repeating the before-and-after promise and had it rewritten against the test log and the CAPA.
    • Pattern questions sent to the specialist. Whether a failed glove test and a later colony at the same port form a pattern goes to the monitoring specialist, whose answer reaches the investigator.
  5. 05Decision

    One signature stops the refill port and adds it to the next media fill

    • Safer steps in force at once. The production instruction, the simulation change request and the deviation start as the lead signs, and the QA head reads the lead's reason afterward.
    • Reasons picked, never prefilled. The lead picks the reason that applies; a typed note stays for a person to read, and the agents never weigh it.
  6. 06Batch list

    Every batch filled in the window, grouped by where it stands today

    • Batches still at the client listed first. Batches at the client and not yet released to market head the list, so the QA head can tell the client within the business day the quality agreement allows.
    • A list that decides nothing. Batch disposition stays with the QA head, and market release with the client's qualified person; the agents only gather the batches.
  7. 07Revision

    Strategy revision drafted with tracked changes and a challenger re-read

    • Changed sections marked against the last approved. Glove replacement, glove testing and the intervention list show struck and inserted text, each sentence with its record.
    • Each sentence held to its evidence. The challenger re-reads the final text before it goes to QA, and the glove clause is no longer cited as met.
  8. 08QA approval

    QA approval possible only after each change and its evidence are opened

    • Opens counted before approval. Both the changes and the refill evidence must be opened, each counted after a short dwell, before the approve button works.
    • Authors cannot approve their own revision. The lead signs as author; a send-back clears that signature, and the agents redraft for the reason given.
  9. 09After approval

    Simulation coverage marked action under way once QA approves

    • Status follows the signatures. The simulation control moved from gap to contained at the lead's decision, and to action under way only at QA approval.
    • The next media fill already scoped. The control names the run that adds the refill through the second port, so its coverage is tracked to that date.

Stopping a port takes effect at once; relaxing a control needs QA

The lead owns the strategy, the QA head signs every change to it, and specialists answer their own points.

Sterility assurance leads

Own the strategy, re-check hazards, decide on gaps and author revisions

  • Each control beside its newest record
  • Interventions counted by access point
  • Revisions drafted with a source per line
QA heads

Approve revisions, amendments, rules and settings; assess batches under deviation

  • Approval only after each change is opened
  • Batches grouped by where they stand
  • Client notice text read before signing
Environmental monitoring specialists

Read plates and answer pattern questions about monitoring points

  • Monitoring points tied to glove controls
  • Pattern questions that arrive with the record
  • Answers passed on to the investigator
Validation engineers

Own the simulation protocol and draft its amendments

  • Routine refills counted by port
  • Amendments approved by QA, never the requester
  • Coverage checked at every re-check

Intervention counts come only from what each batch record states

Each control points at the system that holds its proof, and each status names the record it came from.

Strategy and risk assessmentThe approved strategy, section by section, and the risk assessment behind its hazards
Glove test logsLeak tests before and after campaigns, and visual checks at each use
Environmental monitoringSettle plates, contact plates and fingertip prints at each point, with excursions
Batch recordsIntervention entries by type and access point, and where each batch stands
Simulation protocols and reportsWhich interventions each media fill covered, through which port, and its result
QMS, learning and maintenanceDeviations, CAPAs, change controls, training records and glove change schedules
More screens

A sporicide change skipped its strategy check, and the annual review says so

The rest of the strategy, read from the same links as the bowtie.

All controls in one registerEvery control in the strategy with its hazard, kind, evidence source, linked records, newest evidence and status, searchable by a linked record's number.
Annual review drafted from the bowtiesOne line per Annex 1 element with what the evidence says and its source; sign-off opens only when every touched hazard is re-checked and no revision waits.
What the client's auditor readsApproved statements per hazard for the client's own products; drafts, learned rules and internal notes stay out, and questions arrive in fixed fields.
Rulings the agents now followEach rule cites the lead's ruling as its source; the agents use it only after QA head approval, such as comparing interventions by type and access point.
Records that touched a controlNew deviations, extensions and batch records with the controls each touches and its re-check due date; a change already checked against the strategy says so.
Each step with its signer's meaningSignatures carry their reason and stated meaning, agent steps carry their run session, and both download as a CSV file.

demoSample data, from the working solution.

The challenger caught a glove promise the drafter copied from the old text

Each agent hands its sources to the next, and the sterility assurance lead reads the result before deciding.

Change watcher

Finds new records that touch a control and queues the hazard for its owner.

  • Judges no control
  • Edits no record
Control linker

Links each control to the records that prove it, with the passage each link rests on.

  • Links no record without its passage
Evidence reader

Reads each record against the strategy text and marks the control clean, stale, open or contradicted.

  • Calls nothing clean past its window
  • Keeps a control open while its record is open
Intervention counter

Counts interventions by type and port in batch records against the authorized list and the simulation protocol.

  • Counts only what a batch record states
  • Judges no batch
Review drafter

Drafts the revision and the annual review, citing a record for each statement.

  • Signs nothing
  • Says no control works without evidence
Challenger

Questions the bowtie, and the drafter's own text, as an inspector would.

  • Never rules on a point it raised
  • Closes no point

Nobody approves a revision or a protocol amendment they wrote

Each signer opens a named record first; the signature records what it means.

Sterility assurance lead
Sees
The intervention count, the protocol section and the challenger's points
Signs
The gap decision and the revision, as author
QA head
Sees
Each tracked change and the refill evidence, opened under their own name
Signs
Revisions, protocol amendments, learned rules, settings and the client notice
Validation engineer
Sees
The simulation change request and the refill count
Signs
The protocol amendment, as author
Sterile operations manager
Sees
The production instruction and the blocked port step in the batch record
Signs
Acknowledgement of the production instruction
Environmental monitoring specialist
Sees
The monitoring point's results and the port's glove test history
Signs
The answer to the pattern question, for the investigator

What sterility assurance leads ask about a contamination control strategy

What is a contamination control strategy?

A contamination control strategy is the documented set of controls a sterile plant relies on against contamination. EU GMP Annex 1 asks that it define critical control points, assess how well every control works and be actively reviewed. Here each hazard is a bowtie, and each control is re-checked against its records whenever a new one touches it.

What does a CCS under Annex 1 have to consider?

Annex 1 lists the elements to weigh, from design, premises and personnel to utilities, materials, vendors, validation, cleaning, monitoring and continuous improvement. Changes are assessed against the strategy, and its effectiveness feeds management review.

How are media fill interventions checked against routine production?

Annex 1 asks the aseptic process simulation to include routine interventions in a manner and frequency similar to routine work. The agents count each intervention in the batch records by type and access point and set it beside the protocol, citing the line; whether the number per run is enough stays the validation engineer's call.

Who decides about batches filled with an unsimulated intervention?

The QA head, under a deviation that lists every batch in the window by where it stands; Annex 1 asks that such an intervention be considered during batch disposition. The client's qualified person makes the market release decision for its batches, and the notice telling the client goes out under the QA head's signature.

How soon is a control re-checked after a new record arrives?

A re-check falls due five business days after a new record touches a control, and within one business day for a Grade A record. Each kind of evidence also goes stale on its own window, and a new window takes effect only once the QA head signs.

Send us one hazard
from your strategy.

Share one hazard's controls with its glove test log, a month of batch records and the last simulation protocol, and we can show which controls the records still prove.