Read yesterday's lines, chase unexplained stops and propose recodes
- Each stop beside the operator's note
- Losses that share a cause, added up
- Recodes drafted with confidence
OEE and downtime analysis that reads each stop on the line against the operator's own shift notes, adds up the losses one cause made, and gives that cause an owner.
Follow one bottle line's shift from the tape to an owner ↓A packaging line logs its stops in the MES, and the operator picks a reason code on the line screen while the line is down and the queue backs up. The real reason goes into the shift logbook as the operator wrote it, and nobody joins the two.
So the weekly OEE chart shows a tall bar of unspecified small stops, slow running carries no code at all, and one worn part can show up as small stops, lost speed and rejects in three different buckets. A bar has no owner, so the cause comes back next week, sometimes on the next line.
Built forProduction supervisorsPackaging line managersMaintenance techniciansOperational excellence leads
The reason a line stopped is written in the shift logbook, while the OEE chart counts a code picked with the line down.
Kept in separate systems
Built-in controls
Lost line time gets a cause and an owner the next morning, with what the operators wrote as the evidence.
A production supervisor and a packaging line manager read a bottle line's two shifts, where a new pallet of caps began slipping in the capper chucks after lunch.
demoEvery line, lot, count and person on these screens is sample data.
Supervisors propose, line managers countersign and name owners, maintenance fixes, and operational excellence keeps one definition for every plant.
Read yesterday's lines, chase unexplained stops and propose recodes
Own line output against the client schedule and countersign recodes
Work the CMMS queue for cappers, sealers and labelers
Draft OEE definition changes and make sure each cause has an owner
Around the recode: what the line manager can still recover this week, how each line compares, and what went to the supplier and maintenance.
demoSample data, from the working solution.
The draft said each unspecified stop had a capper alarm; three were stopped by hand to straighten caps.
Small stops, slow running and torque rejects from the same chucks and closures, summed once.
Speed lost after restarts was read from the machine states as start-up ramps.
Two morning stops stay without a reason rather than take a guessed one, with someone named to ask.
They read the MES, the alarm log and the shift logbook without changing any of them.
Reads MES machine states and the stop and alarm logs, builds the tape and applies the signed definition.
Matches each shift note to stops and slow stretches by time, station and words, and drafts recodes with confidence.
Works the six big losses and adds the losses of one cause across small stops, speed and rejects.
Plays the auditor and the line manager against the draft and checks the agents' own claims against the sources.
Plays options forward over the open window with each assumption shown and editable.
Drafts structured requests to outside parties and reads replies through their fields only.
Keeps the day's causes per line with an owner each, and proposes the same check on sibling lines.
Downtime analysis finds why a line lost time and output. Here each stop and slow stretch on the MES tape is read against the operator's own shift notes, losses that share a cause are added up, and a supervisor and a line manager sign the new reason code.
As availability times performance times quality on the plant's signed OEE definition, written out beside the tape, with each of the six big losses linked to its stretch of the shift.
No. The original code stays visible, struck through. The supervisor proposes it, and the line manager countersigns after opening sampled stops.
No. Held product is QA's call, and the assistant names the QA head instead of answering.
Yes. Each line and machine at each plant is computed on the same signed definition, and a cause found on one line is proposed as a check on its sibling lines.
Because the operator picks a downtime reason code on the line screen while the line is down and the queue backs up, and writes the real reason in the shift logbook. Here each code is tested against the MES alarms and the operators' own notes, and a recode the supervisor proposes keeps the original code in view.
Plants find the step that really limits them, rehearse the fix, and take on more client volume.
1-min demoChangeover & Cleaning Time AnalysisThe best crew's changeover order becomes every crew's standard, without touching a validated step.
1-min demoMock Recall & Batch GenealogyEvery unit accounted for in hours, in a report clients and inspectors can follow to the record.
1-min demoSend one line's MES stop log and a week of shift notes, and we will give each stop a sourced reason.